Emergency RadDecon Kit™
Radiation Decontamination Solutions
Significantly removes radioactive material from human skin and other surfaces

Technology and Testing

Radiological decontamination problems are solved through the use of these Patent Pending, proprietary, water-based solutions. They remove radioactive contamination to acceptable levels within minutes. They work by dislocating radioactive ions enabling them to be easily removed. This process provides improved decontamination, lowered dose and major cost savings.

We have three different and specific solutions used for three different classes of radioactive material. The patent-pending solutions are effective on Radioactive Halogens such as iodine and fluorine (use Iodowash™); Transition Metals such as cesium and cobalt (included in Emergency RadDecon Kit™); and . Actinides such as uranium, plutonium, and americium (included in Emergency RadDecon Kit™).

Nuclear power generating facilities and and nuclear waste facilities use our products. We also sell Emergency RadDecon Kits™ to First Responders and the general public.

The core technology of these solutions is called the "Mass Effect" influence. By flooding any radioactive surface with the proprietary solutions, the radioactive material is lifted off the surface and suspended in solution where it can be easily wiped up and removed as radioactive waste. Each of the solutions are specially prepared to address a specific chemical group, they are ion-specific. The Halogen Mass Effect solution (marketed under Iodowash™") will pick up all Halogens such as Iodine, Fluorine, Chlorine, etc. The Transition Metal Mass Effect solution (included in Emergency RadDecon Kit™) will pick up all Transition Metals such as Cesium, Cobalt, Strontium, Thallium, etc. The Actinide Mass Effect solution (included in Emergency RadDecon Kit™) will pick up all Actinide Metals such as Plutonium, Uranium, Technetium, Americium, Radium, etc. These solutions were developed to make them user friendly and provide the most effective decontamination possible. Just spray on and wipe off. The solutions are water based and environmentally friendly. They can be used on intact human skin.

Typically all three solutions above will be used in an industrial setting such as a nuclear power plant. First Responders preparing for a "dirty bomb" or a nuclear disaster will most likely be in need of the Transition Metal or Actinide Solution. Our Emergency RadDecon Kit™ contains solutions for the Transition Metals and the Actinides. Halogen Mass Effect solution (aka Iodowash™) can be purchased separately.

Resins: We have developed ion-specific resins that will remove the radioactive material from the Mass Effect solutions. This is useful in large decontamination operations such as showers for mass human decontamination and in various projects in nuclear power plants. The Mass Effect solution can be run through a resin bed where the radioactive material is removed, thus allowing reuse of the Mass Effect solution.

MSDS for Transition Metals Solution
MSDS for Actinide Solution
MSDS for Iodowash™ Solution
Iodowash™ Test Report with I-131
Autoradiographic images of above I-131 test 
Comparison: Lab Demo of Ion-exchange Technology

$99.99 ea.

Iodowash™ Kit
Radioactive Iodine Decontamination